SparTalk
EDUCATION CATALOG RIGGING CONSULTATION HOME CONTACT US

Go Back   SparTalk > SparTalk
FAQ Members List Calendar Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Display Modes
  #1  
Old 02-26-2013, 01:03 PM
jim252 jim252 is offline
Junior Member
 
Join Date: Feb 2013
Posts: 4
Default Where to find net dip?

Hi all, first post here...

I've struck out trying to get some net dip for my parceled and served rigging. The sources I found only had it in large (5 gal. and up) quantities, except for one, Fitec Fishing, which has gallon size containers, but they have not (so far) responded to my inquiry.

I would have thought Fisheries Supply would carry some, but no dice.

Any advice much appreciated.

Thanks,
Jim
Reply With Quote
  #2  
Old 02-26-2013, 08:11 PM
Ian McColgin Ian McColgin is offline
Senior Member
 
Join Date: Jun 2005
Location: Hyannis, MA
Posts: 368
Default

Wooden boat types make slush from most anything mixed promiscously together - old varnish, some oil (linseed not expensive tung), turps.
G'luck
Reply With Quote
  #3  
Old 02-27-2013, 04:53 AM
dugout dugout is offline
Junior Member
 
Join Date: Aug 2012
Posts: 6
Default

You might try Mike Keller. Most of the pot or net dips have anti-fouling properties. This may be an issue or not.
http://www.mikekellerltd.com

Last edited by dugout : 02-27-2013 at 04:58 AM.
Reply With Quote
  #4  
Old 02-28-2013, 11:16 AM
jim252 jim252 is offline
Junior Member
 
Join Date: Feb 2013
Posts: 4
Default

Thanks folks...

I've been using a mix of turpentine, boiled linseed oil, pine tar and black paint, and was having trouble finding a mix ratio that would dry well, and not rub off on hands, sails, dogs, etc. Thought I would give the net dip idea from the book a try.

Checked with the Keller place, and the dip they sell does seem to have some anti-fouling in it... probably more chemicals than I really need.

I'll keep looking for a net dip source, and if anything turns up, I'll report back.
Reply With Quote
  #5  
Old 02-28-2013, 06:26 PM
benz benz is offline
Senior Member
 
Join Date: Sep 2006
Location: Newport RI
Posts: 244
Default Japan Dryer

Try splashing some Japan drier in as well. I've been experimenting with smelly recipes for a project at work, and the best so far was tar, linseed and shellac, which has a drying agent in it. Experimenting with Japan drier too, but no definite results yet. It seems time is a great help, since marline tarred last season is nice and hard. Too bad it needs a re-do.
Reply With Quote
  #6  
Old 03-01-2013, 04:42 AM
Ian McColgin Ian McColgin is offline
Senior Member
 
Join Date: Jun 2005
Location: Hyannis, MA
Posts: 368
Default

A little Japan dryer can't hurt. I've never tried adding shellack and did not know it was compatable with tar and oil. Varnish is and old varnish has no other use. Makes for a nice hard finish with the turps carrying the oil more into the siezing's fibres.

Many of the old slushes that had no varnish do indeed get messy, especially on a hot day.

I'd still not use net dip and if you don't have old stuff, experiment with the cheapest traditional marine varnish you can find.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On


All times are GMT -7. The time now is 04:22 PM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.