Unusual rigging set up

[Brion Toss]

Hi Brian
A nice puzzle. Discontinuous rigging, of course, is about reducing elasticity by reducing run length, so it is deeply odd to have disco on the lower pieces, and a continuous wire running to the top of the mast. My guess is that the chainplates were designed with a double-spreader rig in mind, with continuous rigging on intermediates and uppers. When they went to the triple spreader configuration, there were no longer enough chainplates for all the wires to be continuous, so they elected to go disco on the worst ones: the shortest ones. Yes, this sounds like an utterly lamebrained thing to do, but the jibstay/backstay anomaly inclines me to see it as likely. And what are they doing with 3/4" clevis pins on 1/2" wire anyway?
Fair leads,
Brion

[Brian Duff]

Brion-you are right that most were double spreader rigs, this is the 'tall rig' version. When I quoted the re-rig on estimate I proposed changing to a V1/V2 the disco from there, and a V1/D1 for the first intermediate, but still werido for sure

we'll see if I get the job and subsequent billable time to puzzle it out further...