|
| EDUCATION | CATALOG | RIGGING | CONSULTATION | HOME | CONTACT US |
|
#26
03-07-2015, 01:07 PM
|
|||
|
|||
I looked at the flicker pictures again and my guess is that you are pulling on line that goes around one of your pins and then breaks after the pin. My thought is that you are getting friction at that pin so not all the force on the line goes to the DUT. But I can't really know for sure because the setup is not clear from the pictures.
Allen 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode