Knot in Lifesling bridle?

[k7cej]

The training syllabus from The Sailing Foundation (the inventors of the Lifesling) as well as their videos show the hoisting tackle being hooking into the loop of line connecting the D-rings. The reason is simple; after pulling the MOB as close up as possible by hand, the D-rings will still be about 1' above the water and out of reach from the deck of most boats. They recommend that the loop be of a size to just reach the rail.

After further thought, I have decided to make a continuous loop out of 1/4" spectra single-braid using a locked brummel and bury. I will then splice the retrieval line around this loop. This way, if one forgets to uncleat the towing line before starting the hoist (as 4 of 5 of our practice class did), one has a couple of feet of hoist before the fouling threatens to bust something.

It's one thing to know in theory how to do something, and entirely something else to actually do it correctly. To all of you out there with unused Lifeslings, I heartily recommend that you actually practice at least hoisting a wet body onto the deck. You may be surprised at how hard it is to get it right the first time.