Bobstay question

[thuss]

We have a Hans Christian 38 cutter which has 5/8" clevis pins on all the rigging including the bobstay. We have 3/8" 1x19 wire all over and a -17 Navtec rod for the bobstay (which is the largest navtec rod you can put on a 5/8" clevis pin). My concern is that our 3/8" wire roughly has a breaking strength of 14,500 and the Navtec rod is roughly 17,000 lbs. Assuming everything else is sound it would make the bobstay the weak link in the rig.

So my question is, with a 5/8" clevis pin is my only option to replace the cranse iron and the bobstay fitting on the hull to get a larger clevis pin size to support a larger bobstay?

Here's a photo of the bobstay arrangement:



Thanks,
Todd

--
http://sailsugata.com s/v Sugata Hans Christian 38 Mark II
http://windandtides.com San Francisco Sailing Weather
http://gearandboats.com Free San Francisco Boating Classifieds