Rigging adapter

[Brion Toss]

Hello,
Ideally, all of the components will be compatible. Trouble is, there are lots of incompatible options, and it sounds like someone has chosen several of them.
First, what size is your rigging? What construction? Is it correct for this boat? How do you know?
If you know what the load is, and therefore what size the wire is, you will automatically be steered to the right pin size. So for instance if you need 3/16" 1x19, you'll need a 3/8" clevis pin. If you need a smaller pin, bushing is an option, as is reaming the hole (though the latter can only be done if you leave enough meat after the hole is reamed).
Fair leads,
Brion Toss