Bob, The blocks I use are Harken #s 1549 and 1550. They have a WL of 1,800 lbs. and both have a "black" sliding switch for on and off. Neither will reverse, but on orrigional set up of your rig, you just flip flop the block if necessary, to get it where it is ratcheting in the direction that you want.
I would NOT CONSIDER the smaller ratchet blocks with their 750lb WL! When I started using this rig 25 or so years ago, I started with these smaller 750 lb WL blocks. Even though I was only 130 lbs, (at the time), I seriously cracked one of the blocks! I used slicker rope then, and liked to come down really fast, then snap to a stop when I got where I wanted to be. This "shock load" is multiples of the static load. I talked to Harken about this application and what had happened. They recomended the larger pair, and kindly sent one of the larger ones (1,800 WL), as a no charge replacement. I immediately bought the other block to match. I've been using them ever since...
This is no place to skimp! Regards, Mark
|