As of now, notice how I qualify this, This is my plan.
I will use the Dynex Dux for my standing rigging. 7mm on the shrouds, whiskers and lowers. 9mm on head, fore, boomkin and back stays. I will stay with wire in Bobstay because of anchor line/chain chafe.
I will be using terminators and deadeyes from Precourt (in black). The medium series. Download there catalog here.
[
www.precourt.ca]
Then I will use this black line for the lashings (New England V-100). That way the whole setup will be black. Hey, if you can't sail good you should at least look good!
It's vectran with a braided sheath. This way it should hold the lashings well and not slip. Dynex is very slipery!
[
www.westmarine.com]
Then to finish off I will rig a bowsprit traveler from Classic Marine.
[
www.classicmarine.co.uk]
Then I will have may sails fitted with luff ropes made of Dynex. Rig a 2 part halyard led to a winch to host the sails with a Facnor Code 0 furler. This will be attached to the traveler.
[
www.facnor.com]
So far I am estimating with furler, the cost of around 4000.
Gary
http://garyfelton.com