Great Jack, I'm getting the creep thing. Saw the chart from Colligo. The specs for my rig are 1/4 and 9/32. So I figured going 7 and 9mm. Using initial settings for wire my percentage will be around 3-4%. So that should solve the creep.
As far as the claim that it is cheaper than wire or at least comparable, I don't particularly agree. Yes, the line is slightly less expensive, but if you up size for creep it is actually more expensive. I did an initial estimate with 7 and 9mm Dynex with the ends and deadeyes. It would cost about $3200 to re-rig my 28' cutter. That will not deter me though. The thought of shedding about 70 lbs aloft is just to good!
Gary