Swagers
Hello,
We use the A-200 for onsite lifeline fabrication. The unit is solid as a rock, has never made a swage out of spec and are quite assured of a true straight swage owing to its mechanism of pulling the terminal vice the dies pushing the terminal.
The A-200 is good to 5/16 wire, but be warned. Wire exceeding 1/4 is a bear to pump thru...you will wish for your Torrington at that point.
The dies are a'la carte. I would recommend you get what you need for starters
True, you will not get the "jewelry quality" look as from a rotary, but done correctly, they are close.
Hayn is the US distributor, contact David Nevin-tell him Tom from Old Dominion Rigging sent you.
Regards,
Tom
|