Thread: Harken furling
View Single Post
  #3  
Old 08-09-2005, 08:38 AM
Brent B Brent B is offline
Junior Member
 
Join Date: Aug 2005
Location: Coopersburg, PA
Posts: 6
Default Furler Fix in situ

If the damage is only 8 ft above the deck, or within stepladder range, I would consider trying the prying and cutting options suggested by Brion from a short ladder. i.e. you need only go up about three steps. The air must be quite still, and you need to take safety precautions in case a puff comes through unexpectedly. To reduce windage you can roll up the sail from the leech and lash it to the forestay/furler.

Brent
Benson Sails
Reply With Quote